DK-SRS48V5KW STACK 3 IN 1 LITHIUM BATTERY MEI INVERTER EN MPPT CONTROLLER YNBOUWD
Technyske parameters
DK-SRS48V-5.0KWH | DK-SRS48V-10KWH | DK-SRS48V-15KWH | DK-SRS48V-20.0KWH | ||
BATTERIJ | |||||
Batterij Module | 1 | 2 | 3 | 4 | |
Batterij enerzjy | 5,12 kWh | 10,24 kWh | 15,36 kWh | 20,48 kWh | |
Batterij Kapasiteit | 100 AH | 200 AH | 300 AH | 400 AH | |
Gewicht | 80 kg | 133 kg | 186kg | 239kg | |
Ofmjittings L × D × H | 710 × 450 × 400 mm | 710 × 450 × 600 mm | 710 × 450 × 800 mm | 710 × 450 × 1000 mm | |
Batterij Type | LiFePO4 | ||||
Batterij Rated Voltage | 51.2V | ||||
Batterij Working Voltage Range | 44.8 ~ 57.6V | ||||
Maksimum oplaadstroom | 100A | ||||
Maksimum discharge stroom | 100A | ||||
DOD | 80% | ||||
Parallelle kwantiteit | 4 | ||||
Ûntwurpen Life-span | 6000 Cycles | ||||
De priis fan PV | |||||
Solar Charge Type | MPPT | ||||
Maksimum útfier Power | 5 kW | ||||
PV Charging Aktuele Range | 0 ~ 80A | ||||
PV Operating Voltage Range | 120 ~ 500V | ||||
MPPT Voltage Range | 120 ~ 450V | ||||
AC CHARGE | |||||
Maksimum Charge Power | 3150W | ||||
AC Charging Aktuele Range | 0 ~ 60A | ||||
Rated Input Voltage | 220/230 Vac | ||||
Input Voltage Range | 90 ~ 280 Vac | ||||
AC OUTPUT | |||||
Rated Output Power | 5 kW | ||||
Maksimum útfier Strom | 30A | ||||
Frekwinsje | 50Hz | ||||
Overload Strom | 35A | ||||
BATTERY INVERTER OUTPUT | |||||
Rated Output Power | 5 kW | ||||
Maksimum Peak Power | 10KVA | ||||
Krêftfaktor | 1 | ||||
Nominearre útfierspanning (Vac) | 230 Vac | ||||
Frekwinsje | 50Hz | ||||
Auto Switch Periode | <15 ms | ||||
THD | <3% | ||||
ALGEMENE DATA | |||||
Kommunikaasje | RS485/CAN/WIFI | ||||
Opslach tiid / temperatuer | 6 moannen @25℃;3 moannen @35℃;1 moannen @45℃; | ||||
Opladen temperatuer berik | 0 ~ 45 ℃ | ||||
Discharge temperatuer berik | -10 ~ 45 ℃ | ||||
Operaasje Feuchte | 5% ~ 85% | ||||
Nominale operaasje hichte | <2000 m | ||||
Cooling Mode | Force-Air Cooling | ||||
Lûd | 60dB(A) | ||||
Ingress Protection Rating | IP20 | ||||
Recommended Operation Miljeu | Binnen | ||||
Ynstallaasje Metoade | Horizontaal |
1.Applikaasje-senario's mei allinich netstroom, mar gjin fotovoltaïsk
As it net normaal is, laadt it de batterij op en leveret it krêft oan 'e loads
As de net is loskeppele of ophâldt mei wurkjen, leveret de batterij macht oan 'e lading troch de machtmodule.
2 .Applikaasje-senario's mei allinich fotovoltaïsk, mar gjin stroomnet
Oerdeis leveret de fotovoltaïek direkt stroom oan 'e loads by it opladen fan' e batterij
Nachts, de batterij leveret macht oan 'e loads fia de macht module.
3 .Complete applikaasje senario
Oerdeis laden de stroomnet en fotovoltaïske tagelyk de batterij op en leverje de loads macht.
Nachts leveret de stroom oan 'e loads, en bliuwt de batterij opladen, as de batterij net folslein opladen is.
As de netspanning is loskeppele, leveret de batterij macht oan 'e loads.