DKOPzV-800-2V800AH SEALED MAINTANANCE FREE GEL TUBULAR OPzV GFMJ BATTERY

Short Description:

Rated Voltage: 2v
Rated Capacity: 800 Ah(10 hr, 1.80 V/cell, 25 ℃)
Approximate Weight(Kg,±3%): 62kg
Terminal: Copper
Case: ABS


Product Detail

Product Tags

Features

1. Long cycle-life.
2. Reliable sealing performance.
3. High initial capacity.
4. Small self-discharge performance.
5. Good discharge performance at high-rate.
6. Flexible and convenient installation, esthetic overall look.

Introduction to battery adhesive

In the global primary battery and rechargeable battery industry, the common zinc-manganese battery developed most rapidly in the 1980s, and the alkaline zinc-manganese battery showed a strong growth trend in the 1990s because of its high cost performance advantage, both of which jointly accounted for more than 80% of the primary battery market. Li-ion batteries with high specific energy and long service life, although expensive, have become the main choice in the market of medical electronic equipment, smart cards, support power supplies and military electronic equipment, although the market is small (about 12%), it is indispensable. As the chemical power source with the widest application range and the largest consumption, the lead-acid battery industry has both opportunities and challenges. With the rapid rise of basic industries such as energy, transportation and communications and the implementation of the "Tenth Five-Year Plan", the demand for lead-acid batteries has increased by 15% to 40% annually. In 2001, the national production of lead-acid batteries reached more than 20 million kW-h. However, other batteries with high specific energy, such as nickel metal hydride (MH-Ni) batteries, lithium-ion batteries and high-efficiency, low-cost and pollution-free solar cells, will become strong competitors for lead-acid batteries. As a kind of raw material in battery industry, adhesive has a great impact on battery performance and product quality, although its amount is small.

Parameter

Model

Voltage

Actual capacity

N.W.

L*W*H*Total hight

DKOPzV-200

2v

200ah

18.2kg

103*206*354*386 mm

DKOPzV-250

2v

250ah

21.5kg

124*206*354*386 mm

DKOPzV-300

2v

300ah

26kg

145*206*354*386 mm

DKOPzV-350

2v

350ah

27.5kg

124*206*470*502 mm

DKOPzV-420

2v

420ah

32.5kg

145*206*470*502 mm

DKOPzV-490

2v

490ah

36.7kg

166*206*470*502 mm

DKOPzV-600

2v

600ah

46.5kg

145*206*645*677 mm

DKOPzV-800

2v

800ah

62kg

191*210*645*677 mm

DKOPzV-1000

2v

1000ah

77kg

233*210*645*677 mm

DKOPzV-1200

2v

1200ah

91kg

275*210*645*677mm

DKOPzV-1500

2v

1500ah

111kg

340*210*645*677mm

DKOPzV-1500B

2v

1500ah

111kg

275*210*795*827mm

DKOPzV-2000

2v

2000ah

154.5kg

399*214*772*804mm

DKOPzV-2500

2v

2500ah

187kg

487*212*772*804mm

DKOPzV-3000

2v

3000ah

222kg

576*212*772*804mm

grapsh

What is OPzV battery?

D King OPzV battery, also named GFMJ battery
The positive plate adopts tubular polar plate, so it also named tubular battery.
The nominal voltage is 2V, the standard capacity normally 200ah, 250ah, 300ah, 350ah, 420ah, 490ah, 600ah, 800ah, 1000ah, 1200ah, 1500ah, 2000ah, 2500ah, 3000ah. Also customized capacity are produced for different applications.

Structural characteristics of D King OPzV battery:
1. Electrolyte:
Made of German fumed silica, the electrolyte in the finished battery is in gel state and does not flow, so there is no leakage and electrolyte stratification.

2. Polar plate:
The positive plate adopts tubular polar plate, which can effectively prevent the falling off of living substances. The positive plate skeleton is formed by multi alloy die casting, with good corrosion resistance and long service life. The negative plate is a paste type plate with a special grid structure design, which improves the utilization rate of living materials and the large current discharge capacity, and has strong charging acceptance capacity.

opzv

3. Battery shell
Made of ABS material, corrosion resistant, high strength, beautiful appearance, high sealing reliability with the cover, no potential leakage risk.

4. Safety valve
With special safety valve structure and proper opening and closing valve pressure, water loss can be reduced, and expansion, cracking and electrolyte drying of battery shell can be avoided.

5. Diaphragm
The special microporous PVC-SiO2 diaphragm imported from Europe is used, with large porosity and low resistance.

6. Terminal
Embedded copper core lead base pole has greater current carrying capacity and corrosion resistance.

Key advantages compare to normal gel battery:
1. Long life time, floating charge design life of 20 years, stable capacity and low decay rate during normal floating charge use.
2. Better cycle performance and deep discharge recovery.
3. It is more capable of working at high temperature and can work normally at - 20 ℃ - 50 ℃.

Gel battery production process

Lead ingot raw materials

Lead ingot raw materials

Polar plate process

Electrode welding

Assemble process

Sealing process

Filling process

Charging process

Storage and shipping

Certifications

dpress

Tubular battery composition

1. Electrolyte: The electrolyte in the finished battery is in gel state and does not flow, so there is no leakage and electrolyte stratification.

2. Pole plate: the positive plate adopts tubular pole plate, which can effectively prevent the falling of live materials. The positive plate framework is made of multi-component alloy die-casting, with good corrosion resistance and long service life. The negative electrode plate is a paste type electrode plate. The special grid structure design improves the utilization rate of live material and the discharge capacity of large current, and the charging acceptance capacity is strong.

3. Battery shell: ABS material, corrosion resistant, high strength, beautiful appearance, high reliability of sealing with cover, and no potential leakage risk.

4. Safety valve: special safety valve structure and proper opening and closing valve pressure can reduce the loss of water and avoid the expansion, fracture and electrolyte drying of the battery shell.

5. Diaphragm: The special microporous PVC-SiO2 diaphragm imported from AMER-SIL in Europe is adopted, with high porosity and low resistance.

6. Terminal: embedded copper core lead base post has greater current carrying capacity and corrosion resistance.


  • Previous:
  • Next:

  • Related Products