DKGB-1260-12V60AH GEL BATTERY
Technical Features
1. Charging efficiency: The usage of imported low resistance raw materials and advanced process help make theinternal resistance smaller and the acceptance ability of small current charging stronger.
2. High and low temperature tolerance: Wide temperature range (lead-acid:-25-50 ℃, and gel:-35-60 ℃), suitablefor indoor and outdoor use in varies environments.
3. Long cycle-life: The design life of lead acid and gel series reach to more than 15 and 18 years respectively, forthe arid is corrosion- resistant. And electrolvte is without risk of stratification by using multiple rare-earth alloy ofindependent intellectual property rights, nanoscale fumed silica imported from Germany as base materials, andelectrolyte of nanometer colloid all by independent research and development.
4. Environment-friendly: Cadmium (Cd), which is poisonous and not easy to recycle, does not exist. Acid leakageof gel electrolvte will not happen. The battery operates in safety and environmental protection.
5. Recovery performance: The adoption of special alloys and lead paste formulations make a low self-dischargerate, good deep discharge tolerance, and strong recover capability.
Parameter
|
Model |
Voltage |
Actual capacity |
N.W. |
L*W*H*Total hight |
|
DKGB-1240 |
12v |
40ah |
11.5kg |
195*164*173mm |
|
DKGB-1250 |
12v |
50ah |
14.5kg |
227*137*204mm |
|
DKGB-1260 |
12v |
60ah |
18.5kg |
326*171*167mm |
|
DKGB-1265 |
12v |
65ah |
19kg |
326*171*167mm |
|
DKGB-1270 |
12v |
70ah |
22.5kg |
330*171*215mm |
|
DKGB-1280 |
12v |
80ah |
24.5kg |
330*171*215mm |
|
DKGB-1290 |
12v |
90ah |
28.5kg |
405*173*231mm |
|
DKGB-12100 |
12v |
100ah |
30kg |
405*173*231mm |
|
DKGB-12120 |
12v |
120ah |
32kgkg |
405*173*231mm |
|
DKGB-12150 |
12v |
150ah |
40.1kg |
482*171*240mm |
|
DKGB-12200 |
12v |
200ah |
55.5kg |
525*240*219mm |
|
DKGB-12250 |
12v |
250ah |
64.1kg |
525*268*220mm |
Production process
Lead ingot raw materials
Polar plate process
Electrode welding
Assemble process
Sealing process
Filling process
Charging process
Storage and shipping
Certifications
More for reading
Maintenance of gel battery
1. Keep the battery surface clean; Regularly check the connection of the battery or battery rack.
2. Establish daily operation records of batteries and record relevant data in detail for future use.
3. Do not discard discarded batteries after use. Please contact the manufacturer for recycling.
4. During battery storage, the battery shall be recharged regularly as required.
Service life of gel battery
The service life of the battery has two indicators. One is the floating charge life, that is, the service life when the maximum capacity that the battery can release is not less than 80% of the rated capacity under standard temperature and continuous floating charge conditions.
The second is the number of times of 80% deep cycle charging and discharging, that is, the number of times German solar cells with full capacity can be recycled after 80% of the rated capacity is discharged. Generally, engineers and technicians only attach importance to the former and neglect the latter.
80% of the times of deep cycle charging and discharging represents the actual number of times that the battery can be used. In the case of frequent power outages or low quality of mains electricity, when the actual number of times of battery use has exceeded the specified number of cycles of charging and discharging, although the actual use time has not reached the calibrated floating charge life, the battery has actually failed. If it cannot be found in time, it will bring greater potential accidents.
